INTRODUCING …
The Deye cobolt-free LFP Battery Range
cobolt-free cutting-edge energy solution.
Deye LFP range of LV batteries
Federal Battery Rebate Approved!!
Comes in 5.1kwh and 10.2kWh versions.
.
Features and advantages
- Safer: Cobalt-free LFP battery chemistry, low voltage safety connection.
- High-performance: 1C charge, 1.2C discharge, 6000 cycles at 90% DOD, 10-year warranty.
- Reliable: Built-in BMS, IP65 rating, wide temperature range (-20°C to 55°C).
- Flexible: Modular design, scalable up to 32 units (326 kWh), ideal for residential and commercial applications.
- Convenient: Auto networking, easy maintenance, Deye remote monitoring and upgrade, compatible with Deye inverters.
- Eco-friendly: Non-toxic materials, pollution-free.
- Two Mounting Methods: Wall-mounted or floor-mounted.
RW-M6.1-B 48V 6.1kWh
RW-F10.2 48V 10.2kWh
AI-W5.1-B-ESS All-in-one
- 5kW & 8kW single Ph Hybrid
- 12kW 3 Ph Hybrid
- 5.12 – 30.72kWh storage per stack
- Max 6 modules per stack
- max 6 stacks in parallel (184.32 kWh)
AI-W5.1-5K-1Ph
5kW Single Ph Hybrid Inverter
AI-W5.1-8K-1Ph
8kW Single Ph Hybrid Inverter
AI-W5.1-12K-3Ph
12 kW 3Ph Hybrid Inveter
AI-W5.1-B PDU3+Base
PDU3+Base for Hybrid Inverters
AI-W5.1-B (5.12 – 30.72kWh)
AI-W5.1-B (5.12kWh)
AI-W5.1-B PDU1+Base
Deye
Inverters
Deye energy storage
inverters can be used for both
on-grid and off-grid PV systems
Deye 5.0kW Single Phase Hybrid Inverter
Deye 6.0kW Single Phase Hybrid Inverter
Deye 8.0kW Single Phase Hybrid Inverter
The Deye SUN-5K-SG04LP01-AU hybrid inverter is suitable for residential and light commercial use, maximizing self-consumption rate of solar energy and increasing your energy impendence. During the day, the PV system generates electricity which will be provided to the loads initially. Then, the excess energy will charge the battery via SUN-5K-SG04LP01-AU. Finally, the stored energy can be released when the loads require it. The battery can also be charged by the diesel generator to ensure uninterrupted supply in the event of grid blackout, and it equipped with RS485/CAN port for battery communication.
The Deye SUN-6K-SG04LP01-AU hybrid inverter is suitable for residential and light commercial use, maximizing self-consumption rate of solar energy and increasing your energy impendence. During the day, the PV system generates electricity which will be provided to the loads initially. Then, the excess energy will charge the battery via SUN-6K-SG04LP01-AU. Finally, the stored energy can be released when the loads require it. The battery can also be charged by the diesel generator to ensure uninterrupted supply in the event of grid blackout, and it equipped with RS485/CAN port for battery communication.
The Deye SUN-8K-SG05LP01-AU hybrid inverter is suitable for residential and light commercial use, maximizing self-consumption rate of solar energy and increasing your energy impendence. During the day, the PV system generates electricity which will be provided to the loads initially. Then, the excess energy will charge the battery via SUN-8K-SG05LP01-AU. Finally, the stored energy can be released when the loads require it. The battery can also be charged by the diesel generator to ensure uninterrupted supply in the event of grid blackout, and it equipped with RS485/CAN port for battery communication.
Features:
- Colorful touch LCD.
- IP65 protection degree.
- DC couple and AC couple to retrofit existing solar system.
- Max. 16pcs parallel for on-grid and off-grid operation.
- Support multiple batteries parallel.
- Max. charging/discharging current of 120A.
- 6 ‘time of use’ periods for battery charging/discharging.
- Support storing energy from diesel generator.
- Local Australian tech support for installers.
- 10 year warranty.
Features:
- Colorful touch LCD.
- IP65 protection degree.
- DC couple and AC couple to retrofit existing solar system.
- Max. 16pcs parallel for on-grid and off-grid operation.
- Support multiple batteries parallel.
- Max. charging/discharging current of 135A.
- 6 ‘time of use’ periods for battery charging/discharging.
- Support storing energy from diesel generator.
- Local Australian tech support for installers.
- 10 year warranty.
Features:
- Colorful touch LCD.
- IP65 protection degree.
- DC couple and AC couple to retrofit existing solar system.
- Max. 16pcs parallel for on-grid and off-grid operation.
- Support multiple batteries parallel.
- Max. charging/discharging current of 190A.
- 6 ‘time of use’ periods for battery charging/discharging.
- Support storing energy from diesel generator.
- Local Australian tech support for installers.
- 10 year warranty.
Deye 10.0kW Single Phase Hybrid Inverter
Deye 16.0kW Single Phase Hybrid Inverter
Deye 5kW 3Ph Hybrid Inverter
The Deye SUN-10K-SG02LP01-AU hybrid inverter is suitable for residential and light commercial use, maximizing self-consumption rate of solar energy and increasing your energy impendence. During the day, the PV system generates electricity which will be provided to the loads initially. Then, the excess energy will charge the battery via SUN-10K-SG02LP01-AU. Finally, the stored energy can be released when the loads require it. The battery can also be charged by the diesel generator to ensure uninterrupted supply in the event of grid blackout, and it equipped with RS485/CAN port for battery communication.
The Deye SUN-16K-SG01LP01-AU hybrid inverter is suitable for residential and light commercial use, maximizing self-consumption rate of solar energy and increasing your energy impendence. During the day, the PV system generates electricity which will be provided to the loads initially. Then, the excess energy will charge the battery via SUN-16K-SG01LP01-AU. Finally, the stored energy can be released when the loads require it. The battery can also be charged by the diesel generator to ensure uninterrupted supply in the event of grid blackout, and it equipped with RS485/CAN port for battery communication.
The Deye SUN-5K-SG04LP3-AU is brand new three phase hybrid inverter with low battery voltage 48V, ensuring system safe and reliable. With compact design and high-power density, this series supports 1.3 DC/AC ratio, saving device investment. It supports three phase unbalanced output, extending the application scenarios. Equipped with CAN port (x2) BMS and parallel, x1 RS485 port for BMS, x1 RS232 port for remotely control, x1 DRM port, which makes the system smart and flexible.
Features:
- Colorful touch LCD.
- IP65 protection degree.
- DC couple and AC couple to retrofit existing solar system.
- Max. 16pcs parallel for on-grid and off-grid operation.
- Support multiple batteries parallel.
- Max. charging/discharging current of 220A.
- 6 ‘time of use’ periods for battery charging/discharging.
- Support storing energy from diesel generator.
- Local Australian tech support for installers.
- 10 year warranty.
Features:
- Colorful touch LCD.
- IP65 protection degree.
- DC couple and AC couple to retrofit existing solar system.
- Max. 16pcs parallel for on-grid and off-grid operation.
- Support multiple batteries parallel.
- Max. charging/discharging current of 290A.
- 6 ‘time of use’ periods for battery charging/discharging.
- Support storing energy from diesel generator.
- Local Australian tech support for installers.
- 10 year warranty.
Features:
- 100% unbalanced output, each phase; Max. output up to 50% rated power
- Colorful touch LCD.
- IP65 protection degree.
- DC couple and AC couple to retrofit existing solar system.
- Max. 16pcs parallel for on-grid and off-grid operation.
- Support multiple batteries parallel.
- Max. charging/discharging current of 120A.
- 8V low voltage battery, transformer isolation design
- 6 ‘time of use’ periods for battery charging/discharging.
- Support storing energy from diesel generator.
- Local Australian tech support for installers.
- 10 year warranty.
Deye 12.0kW 3 Phase Hybrid Inverter
The Deye SUN-12K-SG04LP3-AU is brand new three phase hybrid inverter with low battery voltage 48V, ensuring system safe and reliable. With compact design and high-power density, this series supports 1.3 DC/AC ratio, saving device investment. It supports three phase unbalanced output, extending the application scenarios. Equipped with CAN port (x2) BMS and parallel, x1 RS485 port for BMS, x1 RS232 port for remotely control, x1 DRM port, which makes the system smart and flexible.
Features:
- 100% unbalanced output, each phase; Max. output up to 50% rated power
- Colorful touch LCD.
- IP65 protection degree.
- DC couple and AC couple to retrofit existing solar system.
- Max. 16pcs parallel for on-grid and off-grid operation.
- Support multiple batteries parallel.
- Max. charging/discharging current of 240A.
- 8V low voltage battery, transformer isolation design
- 6 ‘time of use’ periods for battery charging/discharging.
- Support storing energy from diesel generator.
- Local Australian tech support for installers.
- 10 year warranty.
Victron
Inverters
Blue Power
Victron MultiPlus II
48/3000/35-32
3.0K Hybrid Inverter 35A
The MultiPlus-II combines the functions of the MultiPlus and the MultiGrid. It has all the features of the MultiPlus, plus external current transformer option to implement PowerControl and PowerAssist and to optimize self consumption with external current sensing (max. 32A). It also has all the features of the MultiGrid with in-built anti-islanding and an increasingly long list of country approvals. Note: for a short period of time this product was called MultiGrid II.
Features and advantages
- PowerAssist – The MultiPlus-II will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery.
- Energy Storage System – The MultiPlus-II is the key component in a Victron ESS system, providing the flexibility to combine with MPPT Solar Chargers or Grid-tie PV Inverters.
- Uninterupted AC power (UPS function) – In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption.
- Remote Monitoring and Control – Monitor and control your Multi and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, via the required Color Control GX or Venus GX, from adjusting your Multi to auto starting a back generator and more…
Victron MultiPlus II
48/5000/70-50
5.0K Hybrid Inverter 70A
The MultiPlus-II combines the functions of the MultiPlus and the MultiGrid. It has all the features of the MultiPlus, plus external current transformer option to implement PowerControl and PowerAssist and to optimize self consumption with external current sensing (max. 32A). It also has all the features of the MultiGrid with in-built anti-islanding and an increasingly long list of country approvals. Note: for a short period of time this product was called MultiGrid II.
Features and advantages
- PowerAssist – The MultiPlus-II will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery.
- Energy Storage System – The MultiPlus-II is the key component in a Victron ESS system, providing the flexibility to combine with MPPT Solar Chargers or Grid-tie PV Inverters.
- Uninterupted AC power (UPS function) – In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption.
- Remote Monitoring and Control – Monitor and control your Multi and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, via the required Color Control GX or Venus GX, from adjusting your Multi to auto starting a back generator and more…
Victron MultiPlus II GX
48/3000/35-32
3.0K Hybrid Inverter 35A
An Inverter/Charger with device networking built-in, the MultiPlus-II GX communicates with a solar charger, batteries, and other devices to control a grid-connected, off-grid, or remote power installation. Capable of parallel operation for increased power output, or battery charge-rates, the MultiPlus-II GX can also be configured for three-phase supply. A host of advanced features – such as uninterrupted power supply, setting load limits, and supplementing limited grid-power availability with battery power – can all be controlled straight from your phone or smart device. Remote monitoring is also possible.
.
Features and advantages
- PowerAssist – The MultiPlus-II will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery.
- Energy Storage System – The MultiPlus-II is the key component in a Victron ESS system, providing the flexibility to combine with MPPT Solar Chargers or Grid-tie PV Inverters.
- Uninterupted AC power (UPS function) – In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption.
- Remote Monitoring and Control – Monitor and control your Multi and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, via the required Color Control GX or Venus GX, from adjusting your Multi to auto starting a back generator and more…
Victron MultiPlus II GX
48/5000/70-50 GX
5.0K Hybrid Inverter 70A
An Inverter/Charger with device networking built-in, the MultiPlus-II GX communicates with a solar charger, batteries, and other devices to control a grid-connected, off-grid, or remote power installation. Capable of parallel operation for increased power output, or battery charge-rates, the MultiPlus-II GX can also be configured for three-phase supply. A host of advanced features – such as uninterrupted power supply, setting load limits, and supplementing limited grid-power availability with battery power – can all be controlled straight from your phone or smart device. Remote monitoring is also possible.
Features and advantages
- PowerAssist – The MultiPlus-II will prevent overload of a limited AC source, such as a generator or shore power connection. First, battery charging will automatically be reduced when otherwise an overload would occur. The second level will boost the output of a generator or shore side supply with power taken from the battery.
- Energy Storage System – The MultiPlus-II is the key component in a Victron ESS system, providing the flexibility to combine with MPPT Solar Chargers or Grid-tie PV Inverters.
- Uninterupted AC power (UPS function) – In the event of a grid failure, or when shore or generator power is disconnected, the inverter within the Multi is automatically activated and takes over the supply to the connected loads. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption.
- Remote Monitoring and Control – Monitor and control your Multi and system or systems’ locally (LAN) or remotely via the internet from anywhere in the world, using the free VRM app and free VRM portal website. Access can be from a phone, tablet, laptop or PC for multiple operating systems. There is no end to the level of control, via the required Color Control GX or Venus GX, from adjusting your Multi to auto starting a back generator and more…
Victron Venus GX
The Venus GX is the communication-centre of your installation. Venus allows you to talk to all components in your system and ensure they are working in harmony. Monitoring of live data, and changing settings is performed by using your smartphone (or other device) via our free-to-use Victron Remote Management Portal (VRM).
Victron Venus GX
This communication-centre allows you to always have perfect control over your system from wherever you are and to maximise its performance. Simply access your system via our Victron Remote Management (VRM) portal, or access it directly, using the optional GX Touch 50 screen, a Multi-Functional Display (MFD) or our VictronConnect app thanks to its Bluetooth capability.
Victron Colour Control GX
The Color Control GX is the communication-centre of your installation. It offers at-a-glance live information, and lets you control all products connected to it. Full system control is gained – almost anywhere in the world – by accessing your Color Control GX using our free-to-use Victron Remote Management Portal (VRM).
Victron Lynx Power Busbar System
A modular DC bus bar, used to connect batteries to the Lynx DC distribution system.
All Victron products are available
Please note that we have only featured a few of the Victron products on our website, however we offer all Victron products to our customers. If you are interested in any Victron product that is not shown on our website, please contact us with your requirements and we will issue you a price. Please note that all orders over $400 have free delivery.
MPS
MICTRONIX POWER SYSTEMS
12V /24V to 48V DC to DC Chargers
Features:
- Automatic input voltage sensing.
- Automatic start and stop based on input voltage
- Lithium charging profile.
- 100% full rated power.
- 100% full stable output current.
- High efficiency up to 95%.
- IP68 waterproof, Epoxy potting, Anti-vibration, Dustproof.
- Cooling by air convection.
- Surface mountable.
- 3 years warranty.
- Over current protection, over voltage protection, output short circuit protection.
- Automatic temperature regulation and shutdown on over temperature.
12V/24V to 48V DC-DC Charger 10Amp 500Watt
MPS-DC-10-52
12V/24V to 48V DC-DC Charger 20Amp 1000Watt
MPS-DC-20-52